Radionik - Holographic Instruments

Unlimited Living Energies
Holographic Instruments

RADIONIC INSTRUMENTS FOR THE 21st CENTURY

by Chris Dennison

ALIGN="JUSTIFY">The history of Radionics is characterised by the development and evolution of a variety of instruments with which practitioners stimulate healing in their patients. It is always ofgreat interest and of potential value to appreciate the factors that were involved in the development of an instrument and motivated the inventor. In this article Chris Dennison describes the evolution of his instrument and also the experience of a practitioner in using it.

Two years ago I started,a project to create a therapeutic device to re-balance the human energy system. The concept was for a device, simple to use, that would merely need to be touched for a few seconds in order to pass on its healing influence and for the energy fields to be corrected. This was to be an information based, remedy free system which used the intrinsic intelligence of the body to correct its own imbalances. The information was to be held in holographic material which would be attractive to look at, pliable enough to conform to the curves of the body, and hopefully, durable enough to withstand everyday usage.

My interest in holograms (or diffraction gratings) began in 1996 when I came into contact with the work of Michael Defries. For 20 years, or more, he has been doing groundbreaking work with holographic materials, imbuing them with energies to carry out a variety of tasks of a non-medical nature, such as purifying water and food and harmonising discordant energies in the home, workplace and even vehicles. His innovative work coupled with ideas and principles garnered from a variety of sources, including the healer, jack Temple, and the ACMOS Method, a French healing system in which I qualified as a Bio-Energetician in 1995, were the beginnings of the concept mentioned above.

Having my own ideas about what I wanted to accomplish was all very well, but I had no knowledge of how to make these ideas into a working prototype. I asked Michael if he would help me by putting my information into the holograms. He very kindly agreed. We worked together for about 18 months on the initial project. During this time I was experimenting with my own methods of energising the materials we were working with. I was having a small amount of success and I think that Michael, very wisely, understood that I was getting strong enough to be able to carry on on my own. We mutually agreed that it would be best for me to continue alone.

You never know what you can do until you try. From my first efforts at producing a prototype I was convinced that I could develop the skills I would need to see the project through to completion. In this task I was ably assisted by my wife, Janet, who's help has been invaluable. Her wonderful abilities as a medium have enabled me to contact the many unseen helpers in Spirit. They have guided my faltering steps and encouraged me with great good humour and patience to explore the new world of energy revealed to me.

The learning curve was steep. Within six months of working alone I had made the first instrument that was capable of intelligently analysing the needs of the patient. Further refinements followed on closely, such as switching the instruments on and off by mental command and varying, automatically, the energy output to suit individual need. With these discoveries mastered the scene was set for the next stage of this saga.

One evening in October 1998, Janet recounted to me the story of her days work as an aromatherapist and happened to mention what one of her clients, a dear friend and radionic practitioner, Val Forder, had said. Apparently Val was running out of hours in the day to attend the needs of her clients and do everything else that needed doing around the home. Dowsing for each patient could take as long as 40 minutes per treatment. Val very much wanted to increase her workload to reach more people each month, but couldn't see how she could achieve this goal. I said. "She could treat 200 people an hour if she wants." "Oh!" said Janet. "Why don't you tell her that? I am sure she would be interested." Thus began my work on Energy Transmitter.

Although I had not originally intended to make anything that could work at a distance I could see no reason not to try. An intelligent instrument can be turned to any task. I spent a couple of hours sketching out in my mind the kind of attributes and capabilities that I would like to have in this instrument. My initial thought was that this has got to be capable of carrying out the basic analysis of the patient's therapeutic needs on its own, which would then free the operator from the most time consuming aspect of radionics work and enable a new role to be undertaken. Liken it, if you will, to the role a conductor of an orchestra plays. A conductor doesn't create the sounds himself, but does add a personal interpretation to the score and directs the musicians to play. One would merely have to dowse the focal point that the healing energies must affect and direct them to do so. Another aspect of an intelligent instrument should be that it will only give to the patient what is required at that time, not a blanket treatment of its entire repertoire. The orchestra might know how to play several symphonies by a variety of composers but to play them all at the same time would be a cacophony. Most importantly, the instrument will be tuned to the operator to become an extension of the practitioner's mind and then mental communication will be possible. No knobs to turn, buttons to push or anything like that. Just dowse and think. So what about the remedies? Well, remedies are information. All I needed to know was what types of information were required to be placed into the instrument.

Bubbling with enthusiasm I made the phone call to Val the next day. An hour and a half of conversation later, after having explained my ideas I asked Val to enquire with her pendulum whether this concept would be accepted by radionic practitioners. The answer was yes. This was a product that should be made.

I set myself the goal of creating this new design in six to eight weeks. The work that I had done on my own energy instruments would stand me in good stead here. Many of the energies and techniques that I had used previously could be focused on this new task and thereby save a lot of time. I made a visit to Vals home where I was given access to the information that she used in her work I split these thirty or so sources of information into a dozen groups called modalities. These modalities were homeopathy, flower essences, colours, affirmations etc. This would simplify the process of adding further information at a later date because only a fraction of the embedded modalities need be disturbed. The information sources had to be cleansed of all energies that were not conducive to healing, such as the industrial processes of manufacture and transportation and the energies of things that might be living on the paper like bacteria and moulds, before they could be used. Then, with the aid of my helpers, the procedure of capturing the spiritual essences of each remedy within the various modalities began.

1 then wrote detailed instructions on how it was to operate and then added the various energies that would make healing music from all the vibrations contained in the modalities. Just before Christmas 1998 the first prototypes of Energy Transmitter were completed.

"Gosh! Look at that! Isn't it beautiful!" Was the response elicited by the appearance of the six inch square holographic pattern when I removed it from the envelope and handed it to its new owner. "Now, tell me, how does it work?" I explained to Val how to use it.

"This instrument is alive and it is attuned to you. It will only work for you. It will communicate with you through your witness which is embedded in its energy structure. All of the information that you have been working with these past years is in here too, plus some extra modalities that I have listed. To operate the instrument you merely have to place a witness upon it. The energetic requirements of the patient will be analysed and the exact requirements will be selected from the modalities to be broadcast to the patient. It does not send everything that is in here, just what is needed. You then dowse to see if anything else is required which is not included in the modalities and if so you find out what that is in the same way you have been used to and just think it to the patient. End of treatment. Next please. The automatic analysis and broadcast takes about half a second. If you want to focus on a particular area for treatment, just think it through.", There were a few moments silence. Then, "This is going to take a little getting used to, Chris. Let me play with it for a few days and I'll let you know."

When the phone call came one week later I knew that my ideas had translated perfectly into practice. The Instrument and operator were in perfect harmony. Val had come across one initial difficulty which was that in working the old way a lot of personal information about the patient was accumulated because of the remedies required. Now she didn't know what remedies were being given unless she went through all the time consuming process of dowsing it out, which would be defeating the object of the exercise. Val had started to feel uncomfortable about losing that contact with her clients until she realised that she really did not need to know all the personal stuff to be an effective practitioner. When a patient rang to make enquiries about treatment she would say that a new instrument was being used and that treatment had been directed to the skeletal system for six days, for example. Clients seemed to be quite happy with this because they were reporting improved health.

Encouraged by this success I built another type of transmitter with all the same modalities in it that, instead of communicating with the practitioner, communicated with another hologram holding the witness energies. I put a clock in it so that it could automatically give a treatment once a day with minimal intervention from the practitioner. I called the witness store Energy Recorder and the transmitter part Energy Relay. It didn't take very long to make these two new instruments. They proved to be valuable additions to the growing family of healing devices.

Val explained to me that not every radionic practitioner works the way she does. Most use rates. So I had to produce all three instruments in rated form. This meant there was need for only one modality and, therefore, there would be greater operating efficiency. I incorporated all of the Drown and De la Warr rates as well as some new personal rates.

For technical reasons, which I will not bore you with, none of the instruments that I made utilising Rates could accept the remedies as an intrinsic part of their construction. They had a remote access facility to the Rate information held in my home, which brought up the question of the security of that information. The second stumbling block to completing the project was that any personal rates that were added to the store of remedies would be accessible to anyone using my instruments. This was not a popular function.

Many weeks went by while I considered ways around these technical shortcomings. I eventually came up with this solution. I knew what I wanted, but didn't know how to achieve the end result, so, I asked my Team upstairs if they could construct one instrument to encompass all my ideas without the drawbacks. This is what I got.

There is now only Energy Transmitter, which incorporates the functions of Energy Relay/ Recorder, but with an increased capacity of an 800 witness memory. The witness memory lasts for one month. This can be extended, if required, to a maximum of two months. Physically, there is a large holographic pattern mounted on an oak base 8 inches square covered with a 2 mm thick sheet of glass. Both the hologram and the base contain the intelligent energies that look after the working of the instrument. The instrument has access to all the remedies that any practitioner is ever going to use. This does not mean that the practitioner has such access. Personal rates are secure, therefore. The intelligence of the instrument allows the practitioner to program specific functions as required, such as repeat treatments, for example. Remedies may be programmed into pills, creams or liquids from the instrument. The practitioner is encouraged to develop a more unlimited consciousness and as experience and acceptance of the limitless possibilities that the Universe has to offer grows, the instrument will adapt to the new way of working.

The work on this project is at a stage where I feel comfortable about moving from the prototype stage into production. I was invited to attend a small gathering of Radionic Association members on the 23 June when I gave a short talk on what I have been doing. Energy Transmitter was very kindly received.

Every Practitioner who purchased an instrument did so because their dowsing indicated that they should. All those who are using this instrument in their practices have expressed great satisfaction with the results they are achieving. I now offer the same oppertunity to a much wider audience thanks to the Radionic Journal.

1f you would like to apply to purchase an Energy Transmitter instrument I will need the following:

A hair or nail sample of the practitioner, preferably loose in an envelope or a small plastic bag, which will be returned.

Name, full postal address and telephone number.

A cheque made payable to UNLIMITED LIVING ENERGIES for £ 550.00 or an apprpriate transmission to my account.

I reserve the right to refuse any application to purchase in which case your cheque and witness will be returned with an explanation. No further correspondence will be entered into in this eventuality.